dmesg - AMD Radeon R9 270X
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-24-generic (buildd@batsu) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #47-Ubuntu SMP Fri May 2 23:30:00 UTC 2014 (Ubuntu 3.13.0-24.47-generic 3.13.9)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000b6a7ffff] usable
BIOS-e820: [mem 0x00000000b6a80000-0x00000000b6a86fff] ACPI NVS
BIOS-e820: [mem 0x00000000b6a87000-0x00000000b7574fff] usable
BIOS-e820: [mem 0x00000000b7575000-0x00000000b785dfff] reserved
BIOS-e820: [mem 0x00000000b785e000-0x00000000cd065fff] usable
BIOS-e820: [mem 0x00000000cd066000-0x00000000cd0eefff] reserved
BIOS-e820: [mem 0x00000000cd0ef000-0x00000000cd2cffff] usable
BIOS-e820: [mem 0x00000000cd2d0000-0x00000000cda07fff] ACPI NVS
BIOS-e820: [mem 0x00000000cda08000-0x00000000ceffefff] reserved
BIOS-e820: [mem 0x00000000cefff000-0x00000000ceffffff] usable
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000042effffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: ECS Z87H3-A2X EXTREME/Z87H3-A2X EXTREME, BIOS 4.6.5 06/11/2013
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x42f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-C7FFF write-protect
C8000-DFFFF uncachable
E0000-E7FFF write-through
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask 7C00000000 write-back
1 base 0400000000 mask 7FE0000000 write-back
2 base 0420000000 mask 7FF8000000 write-back
3 base 0428000000 mask 7FFC000000 write-back
4 base 042C000000 mask 7FFE000000 write-back
5 base 042E000000 mask 7FFF000000 write-back
6 base 00E0000000 mask 7FE0000000 uncachable
7 base 00D0000000 mask 7FF0000000 uncachable
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 16GB, type WB
reg 1, base: 16GB, range: 512MB, type WB
reg 2, base: 16896MB, range: 128MB, type WB
reg 3, base: 17024MB, range: 64MB, type WB
reg 4, base: 17088MB, range: 32MB, type WB
reg 5, base: 17120MB, range: 16MB, type WB
reg 6, base: 3584MB, range: 512MB, type UC
reg 7, base: 3328MB, range: 256MB, type UC
total RAM covered: 16368M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 32M num_reg: 8 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 256MB, type WB
reg 3, base: 4GB, range: 4GB, type WB
reg 4, base: 8GB, range: 8GB, type WB
reg 5, base: 16GB, range: 512MB, type WB
reg 6, base: 16896MB, range: 256MB, type WB
reg 7, base: 17136MB, range: 16MB, type UC
e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xcf000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd560-0x000fd56f] mapped at [ffff8800000fd560]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000097000] 97000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fdd000, 0x01fddfff] PGTABLE
BRK [0x01fde000, 0x01fdefff] PGTABLE
BRK [0x01fdf000, 0x01fdffff] PGTABLE
init_memory_mapping: [mem 0x42ee00000-0x42effffff]
[mem 0x42ee00000-0x42effffff] page 2M
BRK [0x01fe0000, 0x01fe0fff] PGTABLE
init_memory_mapping: [mem 0x42c000000-0x42edfffff]
[mem 0x42c000000-0x42edfffff] page 2M
init_memory_mapping: [mem 0x400000000-0x42bffffff]
[mem 0x400000000-0x42bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xb6a7ffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0x7fffffff] page 1G
[mem 0x80000000-0xb69fffff] page 2M
[mem 0xb6a00000-0xb6a7ffff] page 4k
init_memory_mapping: [mem 0xb6a87000-0xb7574fff]
[mem 0xb6a87000-0xb6bfffff] page 4k
[mem 0xb6c00000-0xb73fffff] page 2M
[mem 0xb7400000-0xb7574fff] page 4k
BRK [0x01fe1000, 0x01fe1fff] PGTABLE
init_memory_mapping: [mem 0xb785e000-0xcd065fff]
[mem 0xb785e000-0xb79fffff] page 4k
[mem 0xb7a00000-0xccffffff] page 2M
[mem 0xcd000000-0xcd065fff] page 4k
BRK [0x01fe2000, 0x01fe2fff] PGTABLE
init_memory_mapping: [mem 0xcd0ef000-0xcd2cffff]
[mem 0xcd0ef000-0xcd2cffff] page 4k
init_memory_mapping: [mem 0xcefff000-0xceffffff]
[mem 0xcefff000-0xceffffff] page 4k
init_memory_mapping: [mem 0x100000000-0x3ffffffff]
[mem 0x100000000-0x3ffffffff] page 1G
RAMDISK: [mem 0x35b82000-0x36db8fff]
ACPI: RSDP 00000000000f0490 000024 (v02 ALASKA)
ACPI: XSDT 00000000cd9da080 00007C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 00000000cd9e81b0 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 00000000cd9da190 00E01E (v02 ALASKA A M I 00000024 INTL 20091112)
ACPI: FACS 00000000cda06080 000040
ACPI: APIC 00000000cd9e82c0 000092 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 00000000cd9e8358 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 00000000cd9e83a0 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 00000000cd9e88e0 000AD8 (v01 PmRef CpuPm 00003000 INTL 20051117)
ACPI: SSDT 00000000cd9e93b8 0001C7 (v01 PmRef LakeTiny 00003000 INTL 20051117)
ACPI: MCFG 00000000cd9e9580 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: HPET 00000000cd9e95c0 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: SSDT 00000000cd9e95f8 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
ACPI: SSDT 00000000cd9e9968 003380 (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
ACPI: DMAR 00000000cd9ecce8 000070 (v01 INTEL HSW 00000001 INTL 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000042effffff]
Initmem setup node 0 [mem 0x00000000-0x42effffff]
NODE_DATA [mem 0x42eff5000-0x42eff9fff]
[ffffea0000000000-ffffea0010bfffff] PMD -> [ffff88041e600000-ffff88042e5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x42effffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009cfff]
node 0: [mem 0x00100000-0xb6a7ffff]
node 0: [mem 0xb6a87000-0xb7574fff]
node 0: [mem 0xb785e000-0xcd065fff]
node 0: [mem 0xcd0ef000-0xcd2cffff]
node 0: [mem 0xcefff000-0xceffffff]
node 0: [mem 0x100000000-0x42effffff]
On node 0 totalpages: 4177652
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 13054 pages used for memmap
DMA32 zone: 835416 pages, LIFO batch:31
Normal zone: 52160 pages used for memmap
Normal zone: 3338240 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xb6a80000-0xb6a86fff]
PM: Registered nosave memory: [mem 0xb7575000-0xb785dfff]
PM: Registered nosave memory: [mem 0xcd066000-0xcd0eefff]
PM: Registered nosave memory: [mem 0xcd2d0000-0xcda07fff]
PM: Registered nosave memory: [mem 0xcda08000-0xceffefff]
PM: Registered nosave memory: [mem 0xcf000000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xcf000000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88042ec00000 s86336 r8192 d24256 u262144
pcpu-alloc: s86336 r8192 d24256 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4112353
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at /build/buildd/linux-3.13.0/drivers/iommu/dmar.c:488 warn_invalid_dmar+0x7e/0x90()
Your BIOS is broken; DMAR reported at address 0!
BIOS vendor: American Megatrends Inc.; Ver: 4.6.5; Product Version: 1.0
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted 3.13.0-24-generic #47-Ubuntu
Hardware name: ECS Z87H3-A2X EXTREME/Z87H3-A2X EXTREME, BIOS 4.6.5 06/11/2013
000000000000000b ffffffff81c01de8 ffffffff81715ac4 ffffffff81c01e30
ffffffff81c01e20 ffffffff810676bd ffffffff81fdc01c ffffffff81fdc048
0000000000000000 ffffffff81de02c0 ffffffff81c01fb0 ffffffff81c01e80
Call Trace:
[] dump_stack+0x45/0x56
[] warn_slowpath_common+0x7d/0xa0
[] warn_slowpath_fmt_taint+0x44/0x50
[] ? early_ioremap+0x13/0x15
[] ? __acpi_map_table+0x13/0x18
[] warn_invalid_dmar+0x7e/0x90
[] check_zero_address+0x68/0xf4
[] detect_intel_iommu+0x15/0xae
[] pci_iommu_alloc+0x4a/0x6c
[] mem_init+0x17/0x9c
[] start_kernel+0x202/0x443
[] ? repair_env_string+0x5c/0x5c
[] ? early_idt_handlers+0x120/0x120
[] x86_64_start_reservations+0x2a/0x2c
[] x86_64_start_kernel+0x143/0x152
---[ end trace 316353415c444703 ]---
Memory: 16346180K/16710608K available (7338K kernel code, 1138K rwdata, 3388K rodata, 1332K init, 1440K bss, 364428K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-7.
NR_IRQS:16640 nr_irqs:744 16
Console: colour dummy device 80x25
console [tty0] enabled
allocated 67108864 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3499.989 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6999.97 BogoMIPS (lpj=13999956)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 32K (ffffffff81e6b000 - ffffffff81e73000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 28408 entries in 111 pages
dmar: Host address width 39
dmar: DRHD base: 0x00000000000000 flags: 0x1
dmar: parse DMAR table failure.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i7-4770K CPU @ 3.50GHz (fam: 06, model: 3c, stepping: 03)
TSC deadline timer enabled
Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
x86: Booted up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (55999.82 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xb6a80000-0xb6a86fff] (28672 bytes)
PM: Registering ACPI NVS region [mem 0xcd2d0000-0xcda07fff] (7569408 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 23:09:33, date: 05/19/14
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 00000000cd0e4c18 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: SSDT 00000000cd0e4618 0005AA (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0005AA (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: SSDT 00000000cd0e3d98 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3e]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfeafffff]
pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:01.1: [8086:0c05] type 01 class 0x060400
pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xf7f00000-0xf7f0ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf7f1a000-0xf7f1a00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xf7f18000-0xf7f183ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf7f10000-0xf7f13fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:244e] type 01 class 0x060401
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1c.5: [8086:8c1a] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: System wakeup disabled by ACPI
pci 0000:00:1c.7: [8086:8c1e] type 01 class 0x060400
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf7f17000-0xf7f173ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:8c44] type 00 class 0x060100
pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077]
pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063]
pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057]
pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043]
pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf7f16000-0xf7f167ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf7f15000-0xf7f150ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
pci 0000:01:00.0: [1002:6810] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 0x18: [mem 0xf7d00000-0xf7d3ffff 64bit]
pci 0000:01:00.0: reg 0x20: [io 0xd000-0xd0ff]
pci 0000:01:00.0: reg 0x30: [mem 0xf7d40000-0xf7d5ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D1 D2 D3hot
pci 0000:01:00.0: System wakeup disabled by ACPI
pci 0000:01:00.1: [1002:aab0] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xf7d60000-0xf7d63fff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf7e00000-0xf7efffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [io 0x0000-0x00ff]
pci 0000:02:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit]
pci 0000:02:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:01.1: PCI bridge to [bus 02]
acpiphp: Slot [1] registered
pci 0000:00:1c.0: PCI bridge to [bus 03]
pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:04:00.0: reg 0x10: [io 0xc000-0xc0ff]
pci 0000:04:00.0: reg 0x18: [mem 0xf7c00000-0xf7c00fff 64bit]
pci 0000:04:00.0: reg 0x20: [mem 0xf0100000-0xf0103fff 64bit pref]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: PCI bridge to [bus 04]
pci 0000:00:1c.2: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.2: bridge window [mem 0xf7c00000-0xf7cfffff]
pci 0000:00:1c.2: bridge window [mem 0xf0100000-0xf01fffff 64bit pref]
pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:05:00.0: reg 0x10: [io 0xb000-0xb0ff]
pci 0000:05:00.0: reg 0x18: [mem 0xf7b00000-0xf7b00fff 64bit]
pci 0000:05:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:05:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: PCI bridge to [bus 05]
pci 0000:00:1c.3: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.3: bridge window [mem 0xf7b00000-0xf7bfffff]
pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
pci 0000:06:00.0: [1283:8893] type 01 class 0x060401
pci 0000:06:00.0: supports D1 D2
pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:06:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.4: PCI bridge to [bus 06-07] (subtractive decode)
pci 0000:00:1c.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1c.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1c.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1c.4: bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode)
pci 0000:00:1c.4: bridge window [mem 0x000cc000-0x000cffff] (subtractive decode)
pci 0000:00:1c.4: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
pci 0000:00:1c.4: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:00:1c.4: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:00:1c.4: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
pci 0000:00:1c.4: bridge window [mem 0xd0000000-0xfeafffff] (subtractive decode)
pci 0000:06:00.0: PCI bridge to [bus 07] (subtractive decode)
pci 0000:06:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
pci 0000:06:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
pci 0000:06:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
pci 0000:06:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
pci 0000:06:00.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:06:00.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:06:00.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:06:00.0: bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode)
pci 0000:06:00.0: bridge window [mem 0x000cc000-0x000cffff] (subtractive decode)
pci 0000:06:00.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
pci 0000:06:00.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:06:00.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:06:00.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
pci 0000:06:00.0: bridge window [mem 0xd0000000-0xfeafffff] (subtractive decode)
pci 0000:08:00.0: [1b21:0612] type 00 class 0x010601
pci 0000:08:00.0: reg 0x10: [io 0xa050-0xa057]
pci 0000:08:00.0: reg 0x14: [io 0xa040-0xa043]
pci 0000:08:00.0: reg 0x18: [io 0xa030-0xa037]
pci 0000:08:00.0: reg 0x1c: [io 0xa020-0xa023]
pci 0000:08:00.0: reg 0x20: [io 0xa000-0xa01f]
pci 0000:08:00.0: reg 0x24: [mem 0xf7a00000-0xf7a001ff]
pci 0000:08:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.5: PCI bridge to [bus 08]
pci 0000:00:1c.5: bridge window [io 0xa000-0xafff]
pci 0000:00:1c.5: bridge window [mem 0xf7a00000-0xf7afffff]
pci 0000:09:00.0: [1b21:0612] type 00 class 0x010601
pci 0000:09:00.0: reg 0x10: [io 0x9050-0x9057]
pci 0000:09:00.0: reg 0x14: [io 0x9040-0x9043]
pci 0000:09:00.0: reg 0x18: [io 0x9030-0x9037]
pci 0000:09:00.0: reg 0x1c: [io 0x9020-0x9023]
pci 0000:09:00.0: reg 0x20: [io 0x9000-0x901f]
pci 0000:09:00.0: reg 0x24: [mem 0xf7900000-0xf79001ff]
pci 0000:09:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.7: PCI bridge to [bus 09]
pci 0000:00:1c.7: bridge window [io 0x9000-0x9fff]
pci 0000:00:1c.7: bridge window [mem 0xf7900000-0xf79fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: Enabled 5 GPEs in block 00 to 3F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
pci 0000:01:00.1: no compatible bridge window for [mem 0xf7d60000-0xf7d63fff 64bit]
pci 0000:01:00.0: no compatible bridge window for [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: no compatible bridge window for [mem 0xf7d00000-0xf7d3ffff 64bit]
pci 0000:01:00.0: no compatible bridge window for [io 0xd000-0xd0ff]
e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
e820: reserve RAM buffer [mem 0xb6a80000-0xb7ffffff]
e820: reserve RAM buffer [mem 0xb7575000-0xb7ffffff]
e820: reserve RAM buffer [mem 0xcd066000-0xcfffffff]
e820: reserve RAM buffer [mem 0xcd2d0000-0xcfffffff]
e820: reserve RAM buffer [mem 0xcf000000-0xcfffffff]
e820: reserve RAM buffer [mem 0x42f000000-0x42fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:05: disabling [io 0x002e-0x002f] because it overlaps 0000:01:00.0 BAR 4 [io 0x0000-0x00ff]
pnp 00:05: disabling [io 0x004e-0x004f] because it overlaps 0000:01:00.0 BAR 4 [io 0x0000-0x00ff]
pnp 00:05: disabling [io 0x0061] because it overlaps 0000:01:00.0 BAR 4 [io 0x0000-0x00ff]
pnp 00:05: disabling [io 0x0063] because it overlaps 0000:01:00.0 BAR 4 [io 0x0000-0x00ff]
pnp 00:05: disabling [io 0x0065] because it overlaps 0000:01:00.0 BAR 4 [io 0x0000-0x00ff]
pnp 00:05: disabling [io 0x0067] because it overlaps 0000:01:00.0 BAR 4 [io 0x0000-0x00ff]
pnp 00:05: disabling [io 0x0070] because it overlaps 0000:01:00.0 BAR 4 [io 0x0000-0x00ff]
pnp 00:05: disabling [io 0x0080] because it overlaps 0000:01:00.0 BAR 4 [io 0x0000-0x00ff]
pnp 00:05: disabling [io 0x0092] because it overlaps 0000:01:00.0 BAR 4 [io 0x0000-0x00ff]
pnp 00:05: disabling [io 0x00b2-0x00b3] because it overlaps 0000:01:00.0 BAR 4 [io 0x0000-0x00ff]
pnp 00:05: disabling [io 0x002e-0x002f disabled] because it overlaps 0000:02:00.0 BAR 0 [io 0x0000-0x00ff]
pnp 00:05: disabling [io 0x004e-0x004f disabled] because it overlaps 0000:02:00.0 BAR 0 [io 0x0000-0x00ff]
pnp 00:05: disabling [io 0x0061 disabled] because it overlaps 0000:02:00.0 BAR 0 [io 0x0000-0x00ff]
pnp 00:05: disabling [io 0x0063 disabled] because it overlaps 0000:02:00.0 BAR 0 [io 0x0000-0x00ff]
pnp 00:05: disabling [io 0x0065 disabled] because it overlaps 0000:02:00.0 BAR 0 [io 0x0000-0x00ff]
pnp 00:05: disabling [io 0x0067 disabled] because it overlaps 0000:02:00.0 BAR 0 [io 0x0000-0x00ff]
pnp 00:05: disabling [io 0x0070 disabled] because it overlaps 0000:02:00.0 BAR 0 [io 0x0000-0x00ff]
pnp 00:05: disabling [io 0x0080 disabled] because it overlaps 0000:02:00.0 BAR 0 [io 0x0000-0x00ff]
pnp 00:05: disabling [io 0x0092 disabled] because it overlaps 0000:02:00.0 BAR 0 [io 0x0000-0x00ff]
pnp 00:05: disabling [io 0x00b2-0x00b3 disabled] because it overlaps 0000:02:00.0 BAR 0 [io 0x0000-0x00ff]
system 00:05: [io 0x0680-0x069f] has been reserved
system 00:05: [io 0xffff] has been reserved
system 00:05: [io 0xffff] has been reserved
system 00:05: [io 0xffff] has been reserved
system 00:05: [io 0x1c00-0x1cfe] has been reserved
system 00:05: [io 0x1d00-0x1dfe] has been reserved
system 00:05: [io 0x1e00-0x1efe] has been reserved
system 00:05: [io 0x1f00-0x1ffe] has been reserved
system 00:05: [io 0x1800-0x18fe] could not be reserved
system 00:05: [io 0x164e-0x164f] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:07: [io 0x1854-0x1857] has been reserved
system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:08: disabling [io 0x0040-0x004f] because it overlaps 0000:01:00.0 BAR 4 [io 0x0000-0x00ff]
pnp 00:08: disabling [io 0x0040-0x004f disabled] because it overlaps 0000:02:00.0 BAR 0 [io 0x0000-0x00ff]
system 00:08: [io 0x0a00-0x0a0f] has been reserved
system 00:08: [io 0x0a10-0x0a1f] has been reserved
system 00:08: [io 0x0a20-0x0a2f] has been reserved
system 00:08: [io 0x0a30-0x0a3f] has been reserved
system 00:08: [io 0x0a50-0x0a5f] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: [dma 0 disabled]
pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:0a: disabling [io 0x0010-0x001f] because it overlaps 0000:01:00.0 BAR 4 [io 0x0000-0x00ff]
pnp 00:0a: disabling [io 0x0022-0x003f] because it overlaps 0000:01:00.0 BAR 4 [io 0x0000-0x00ff]
pnp 00:0a: disabling [io 0x0044-0x005f] because it overlaps 0000:01:00.0 BAR 4 [io 0x0000-0x00ff]
pnp 00:0a: disabling [io 0x0062-0x0063] because it overlaps 0000:01:00.0 BAR 4 [io 0x0000-0x00ff]
pnp 00:0a: disabling [io 0x0065-0x006f] because it overlaps 0000:01:00.0 BAR 4 [io 0x0000-0x00ff]
pnp 00:0a: disabling [io 0x0072-0x007f] because it overlaps 0000:01:00.0 BAR 4 [io 0x0000-0x00ff]
pnp 00:0a: disabling [io 0x0080] because it overlaps 0000:01:00.0 BAR 4 [io 0x0000-0x00ff]
pnp 00:0a: disabling [io 0x0084-0x0086] because it overlaps 0000:01:00.0 BAR 4 [io 0x0000-0x00ff]
pnp 00:0a: disabling [io 0x0088] because it overlaps 0000:01:00.0 BAR 4 [io 0x0000-0x00ff]
pnp 00:0a: disabling [io 0x008c-0x008e] because it overlaps 0000:01:00.0 BAR 4 [io 0x0000-0x00ff]
pnp 00:0a: disabling [io 0x0090-0x009f] because it overlaps 0000:01:00.0 BAR 4 [io 0x0000-0x00ff]
pnp 00:0a: disabling [io 0x00a2-0x00bf] because it overlaps 0000:01:00.0 BAR 4 [io 0x0000-0x00ff]
pnp 00:0a: disabling [io 0x00e0-0x00ef] because it overlaps 0000:01:00.0 BAR 4 [io 0x0000-0x00ff]
pnp 00:0a: disabling [io 0x0010-0x001f disabled] because it overlaps 0000:02:00.0 BAR 0 [io 0x0000-0x00ff]
pnp 00:0a: disabling [io 0x0022-0x003f disabled] because it overlaps 0000:02:00.0 BAR 0 [io 0x0000-0x00ff]
pnp 00:0a: disabling [io 0x0044-0x005f disabled] because it overlaps 0000:02:00.0 BAR 0 [io 0x0000-0x00ff]
pnp 00:0a: disabling [io 0x0062-0x0063 disabled] because it overlaps 0000:02:00.0 BAR 0 [io 0x0000-0x00ff]
pnp 00:0a: disabling [io 0x0065-0x006f disabled] because it overlaps 0000:02:00.0 BAR 0 [io 0x0000-0x00ff]
pnp 00:0a: disabling [io 0x0072-0x007f disabled] because it overlaps 0000:02:00.0 BAR 0 [io 0x0000-0x00ff]
pnp 00:0a: disabling [io 0x0080 disabled] because it overlaps 0000:02:00.0 BAR 0 [io 0x0000-0x00ff]
pnp 00:0a: disabling [io 0x0084-0x0086 disabled] because it overlaps 0000:02:00.0 BAR 0 [io 0x0000-0x00ff]
pnp 00:0a: disabling [io 0x0088 disabled] because it overlaps 0000:02:00.0 BAR 0 [io 0x0000-0x00ff]
pnp 00:0a: disabling [io 0x008c-0x008e disabled] because it overlaps 0000:02:00.0 BAR 0 [io 0x0000-0x00ff]
pnp 00:0a: disabling [io 0x0090-0x009f disabled] because it overlaps 0000:02:00.0 BAR 0 [io 0x0000-0x00ff]
pnp 00:0a: disabling [io 0x00a2-0x00bf disabled] because it overlaps 0000:02:00.0 BAR 0 [io 0x0000-0x00ff]
pnp 00:0a: disabling [io 0x00e0-0x00ef disabled] because it overlaps 0000:02:00.0 BAR 0 [io 0x0000-0x00ff]
system 00:0a: [io 0x04d0-0x04d1] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0b: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:0b: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:0b: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:0b: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:0b: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:0b: [mem 0xff000000-0xffffffff] has been reserved
system 00:0b: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:0b: [mem 0xf7fef000-0xf7feffff] has been reserved
system 00:0b: [mem 0xf7ff0000-0xf7ff0fff] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 12 devices
ACPI: bus type PNP unregistered
pci 0000:01:00.0: no compatible bridge window for [mem 0xf7d40000-0xf7d5ffff pref]
pci 0000:00:01.1: BAR 14: assigned [mem 0xd0000000-0xd00fffff]
pci 0000:00:01.1: BAR 15: assigned [mem 0xd0100000-0xd01fffff 64bit pref]
pci 0000:00:01.1: BAR 13: assigned [io 0x2000-0x2fff]
pci 0000:01:00.0: BAR 0: assigned [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:01:00.0: BAR 2: assigned [mem 0xf7e00000-0xf7e3ffff 64bit]
pci 0000:01:00.0: BAR 6: assigned [mem 0xf7e40000-0xf7e5ffff pref]
pci 0000:01:00.1: BAR 0: assigned [mem 0xf7e60000-0xf7e63fff 64bit]
pci 0000:01:00.0: BAR 4: assigned [io 0xe000-0xe0ff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf7e00000-0xf7efffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:02:00.0: BAR 4: assigned [mem 0xd0100000-0xd0103fff 64bit pref]
pci 0000:02:00.0: BAR 2: assigned [mem 0xd0000000-0xd0000fff 64bit]
pci 0000:02:00.0: BAR 0: assigned [io 0x2000-0x20ff]
pci 0000:00:01.1: PCI bridge to [bus 02]
pci 0000:00:01.1: bridge window [io 0x2000-0x2fff]
pci 0000:00:01.1: bridge window [mem 0xd0000000-0xd00fffff]
pci 0000:00:01.1: bridge window [mem 0xd0100000-0xd01fffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 03]
pci 0000:00:1c.2: PCI bridge to [bus 04]
pci 0000:00:1c.2: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.2: bridge window [mem 0xf7c00000-0xf7cfffff]
pci 0000:00:1c.2: bridge window [mem 0xf0100000-0xf01fffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 05]
pci 0000:00:1c.3: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.3: bridge window [mem 0xf7b00000-0xf7bfffff]
pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
pci 0000:06:00.0: PCI bridge to [bus 07]
pci 0000:00:1c.4: PCI bridge to [bus 06-07]
pci 0000:00:1c.5: PCI bridge to [bus 08]
pci 0000:00:1c.5: bridge window [io 0xa000-0xafff]
pci 0000:00:1c.5: bridge window [mem 0xf7a00000-0xf7afffff]
pci 0000:00:1c.7: PCI bridge to [bus 09]
pci 0000:00:1c.7: bridge window [io 0x9000-0x9fff]
pci 0000:00:1c.7: bridge window [mem 0xf7900000-0xf79fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c8000-0x000cbfff]
pci_bus 0000:00: resource 8 [mem 0x000cc000-0x000cffff]
pci_bus 0000:00: resource 9 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: resource 10 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 11 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 12 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 13 [mem 0xd0000000-0xfeafffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xf7e00000-0xf7efffff]
pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:02: resource 1 [mem 0xd0000000-0xd00fffff]
pci_bus 0000:02: resource 2 [mem 0xd0100000-0xd01fffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:04: resource 1 [mem 0xf7c00000-0xf7cfffff]
pci_bus 0000:04: resource 2 [mem 0xf0100000-0xf01fffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:05: resource 1 [mem 0xf7b00000-0xf7bfffff]
pci_bus 0000:05: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:06: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:06: resource 7 [mem 0x000c8000-0x000cbfff]
pci_bus 0000:06: resource 8 [mem 0x000cc000-0x000cffff]
pci_bus 0000:06: resource 9 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:06: resource 10 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:06: resource 11 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:06: resource 12 [mem 0x000dc000-0x000dffff]
pci_bus 0000:06: resource 13 [mem 0xd0000000-0xfeafffff]
pci_bus 0000:07: resource 8 [io 0x0000-0x0cf7]
pci_bus 0000:07: resource 9 [io 0x0d00-0xffff]
pci_bus 0000:07: resource 10 [mem 0x000a0000-0x000bffff]
pci_bus 0000:07: resource 11 [mem 0x000c8000-0x000cbfff]
pci_bus 0000:07: resource 12 [mem 0x000cc000-0x000cffff]
pci_bus 0000:07: resource 13 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:07: resource 14 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:07: resource 15 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:07: resource 16 [mem 0x000dc000-0x000dffff]
pci_bus 0000:07: resource 17 [mem 0xd0000000-0xfeafffff]
pci_bus 0000:08: resource 0 [io 0xa000-0xafff]
pci_bus 0000:08: resource 1 [mem 0xf7a00000-0xf7afffff]
pci_bus 0000:09: resource 0 [io 0x9000-0x9fff]
pci_bus 0000:09: resource 1 [mem 0xf7900000-0xf79fffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 18652K (ffff880035b82000 - ffff880036db9000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xc9066000-0xcd066000] (64MB) mapped at [ffff8800c9066000-ffff8800cd065fff]
microcode: CPU0 sig=0x306c3, pf=0x2, revision=0x9
microcode: CPU1 sig=0x306c3, pf=0x2, revision=0x9
microcode: CPU2 sig=0x306c3, pf=0x2, revision=0x9
microcode: CPU3 sig=0x306c3, pf=0x2, revision=0x9
microcode: CPU4 sig=0x306c3, pf=0x2, revision=0x9
microcode: CPU5 sig=0x306c3, pf=0x2, revision=0x9
microcode: CPU6 sig=0x306c3, pf=0x2, revision=0x9
microcode: CPU7 sig=0x306c3, pf=0x2, revision=0x9
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1400540973.460:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 31962
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
pcieport 0000:00:01.1: irq 41 for MSI/MSI-X
pcieport 0000:00:1c.0: irq 42 for MSI/MSI-X
pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X
pcieport 0000:00:1c.3: irq 44 for MSI/MSI-X
pcieport 0000:00:1c.5: irq 45 for MSI/MSI-X
pcieport 0000:00:1c.7: irq 46 for MSI/MSI-X
pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:01.1: Signaling PME through PCIe PME interrupt
pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.1:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
pci 0000:08:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.7: Signaling PME through PCIe PME interrupt
pci 0000:09:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.7:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
efifb: probing for efifb
efifb: framebuffer at 0xa0000, mapped to 0xffff8800000a0000, using 64k, total 64k
efifb: mode is 640x480x1, linelength=80, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 80x30
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x42120
intel_idle: v0.4 model 0x3C
intel_idle: lapic_timer_reliable_states 0xffffffff
ipmi message handler version 39.2
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: Fan [FAN0] (off)
ACPI: Fan [FAN1] (off)
ACPI: Fan [FAN2] (off)
ACPI: Fan [FAN3] (off)
ACPI: Fan [FAN4] (off)
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
GHES: HEST is not enabled!
00:09: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7f18000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-24-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7f17000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.13.0-24-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
xhci_hcd 0000:00:14.0: irq 47 for MSI/MSI-X
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.13.0-24-generic xhci_hcd
usb usb3: SerialNumber: 0000:00:14.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 14 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.13.0-24-generic xhci_hcd
usb usb4: SerialNumber: 0000:00:14.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:06: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: [email protected]
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 69b0d0a79b85d90621706e8d06604d730b359fc0'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
Magic number: 14:478:201
acpi device:56: hash matches
rtc_cmos 00:06: setting system clock to 2014-05-19 23:09:33 UTC (1400540973)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1332K (ffffffff81d1e000 - ffffffff81e6b000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 844K (ffff88000172d000 - ffff880001800000)
Freeing unused kernel memory: 708K (ffff880001b4f000 - ffff880001c00000)
systemd-udevd[144]: starting version 204
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: enabling device (0000 -> 0003)
r8169 0000:02:00.0: irq 48 for MSI/MSI-X
ahci 0000:00:1f.2: version 3.0
r8169 0000:02:00.0 eth0: RTL8168e/8111e at 0xffffc900018b6000, c0:4a:00:02:61:87, XID 0c200000 IRQ 48
r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
ahci 0000:00:1f.2: irq 49 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
r8169 0000:04:00.0: irq 50 for MSI/MSI-X
r8169 0000:04:00.0 eth1: RTL8168g/8111g at 0xffffc900018c6000, c8:9c:dc:f2:d4:02, XID 0c000800 IRQ 50
r8169 0000:04:00.0 eth1: jumbo features [frames: 9200 bytes, tx checksumming: ko]
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:05:00.0: irq 51 for MSI/MSI-X
r8169 0000:05:00.0 eth2: RTL8168g/8111g at 0xffffc900018c8000, 74:27:ea:3a:bd:c2, XID 0c000800 IRQ 51
r8169 0000:05:00.0 eth2: jumbo features [frames: 9200 bytes, tx checksumming: ko]
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf7f16000 port 0xf7f16100 irq 49
ata2: SATA max UDMA/133 abar m2048@0xf7f16000 port 0xf7f16180 irq 49
ata3: SATA max UDMA/133 abar m2048@0xf7f16000 port 0xf7f16200 irq 49
ata4: SATA max UDMA/133 abar m2048@0xf7f16000 port 0xf7f16280 irq 49
ata5: SATA max UDMA/133 abar m2048@0xf7f16000 port 0xf7f16300 irq 49
ata6: SATA max UDMA/133 abar m2048@0xf7f16000 port 0xf7f16380 irq 49
ahci 0000:08:00.0: irq 52 for MSI/MSI-X
ahci 0000:08:00.0: SSS flag set, parallel bus scan disabled
ahci 0000:08:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:08:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
scsi6 : ahci
scsi7 : ahci
ata7: SATA max UDMA/133 abar m512@0xf7a00000 port 0xf7a00100 irq 52
ata8: SATA max UDMA/133 abar m512@0xf7a00000 port 0xf7a00180 irq 52
ahci 0000:09:00.0: irq 53 for MSI/MSI-X
ahci 0000:09:00.0: SSS flag set, parallel bus scan disabled
ahci 0000:09:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:09:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
scsi8 : ahci
scsi9 : ahci
ata9: SATA max UDMA/133 abar m512@0xf7900000 port 0xf7900100 irq 53
ata10: SATA max UDMA/133 abar m512@0xf7900000 port 0xf7900180 irq 53
usb 1-1: new high-speed USB device number 2 using ehci-pci
ata7: SATA link down (SStatus 0 SControl 300)
ata9: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata1: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata4.00: failed to get NCQ Send/Recv Log Emask 0x1
ata4.00: ATA-9: Samsung SSD 840 EVO 120GB, EXT0BB0Q, max UDMA/133
ata4.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata4.00: failed to get NCQ Send/Recv Log Emask 0x1
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access ATA Samsung SSD 840 EXT0 PQ: 0 ANSI: 5
sd 3:0:0:0: Attached scsi generic sg0 type 0
sd 3:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 3:0:0:0: [sda] Write Protect is off
sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 >
sd 3:0:0:0: [sda] Attached SCSI disk
usb 1-1: New USB device found, idVendor=8087, idProduct=8008
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
usb 2-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: New USB device found, idVendor=8087, idProduct=8000
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
ata8: SATA link down (SStatus 0 SControl 300)
usb 3-1: new full-speed USB device number 2 using xhci_hcd
usb 3-1: New USB device found, idVendor=1532, idProduct=010e
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: Razer BlackWidow
usb 3-1: Manufacturer: Razer
tsc: Refined TSC clocksource calibration: 3499.996 MHz
ata10: SATA link down (SStatus 0 SControl 300)
usb 3-12: new high-speed USB device number 4 using xhci_hcd
usb 3-12: New USB device found, idVendor=3322, idProduct=5544
usb 3-12: New USB device strings: Mfr=10, Product=11, SerialNumber=0
usb 3-12: Product: USB 2.0 HUB
usb 3-12: Manufacturer: GENESYS
hub 3-12:1.0: USB hub found
hub 3-12:1.0: 4 ports detected
random: init urandom read with 39 bits of entropy available
init: plymouth-upstart-bridge main process (229) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (239) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (241) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (243) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
usb 3-14: new full-speed USB device number 5 using xhci_hcd
usb 3-14: New USB device found, idVendor=0403, idProduct=6001
usb 3-14: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-14: Product: FT232R USB UART
usb 3-14: Manufacturer: FTDI
usb 3-14: SerialNumber: A800fq8V
Adding 16708604k swap on /dev/sda5. Priority:-1 extents:1 across:16708604k SSFS
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
systemd-udevd[353]: starting version 204
lp: driver loaded but no devices found
wmi: Mapper loaded
ppdev: user-space parallel port driver
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
usb 3-12.1: new full-speed USB device number 6 using xhci_hcd
mei_me 0000:00:16.0: irq 54 for MSI/MSI-X
usb 3-12.1: New USB device found, idVendor=0cf3, idProduct=3000
usb 3-12.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
ACPI Warning: 0x0000000000001828-0x000000000000182f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000001c30-0x0000000000001c3f SystemIO conflicts with Region \GPRL 1 (20131115/utaddress-251)
ACPI Warning: 0x0000000000001c30-0x0000000000001c3f SystemIO conflicts with Region \GPR_ 2 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000001c00-0x0000000000001c2f SystemIO conflicts with Region \GPRL 1 (20131115/utaddress-251)
ACPI Warning: 0x0000000000001c00-0x0000000000001c2f SystemIO conflicts with Region \GPR_ 2 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
snd_hda_intel 0000:00:1b.0: irq 55 for MSI/MSI-X
hda-intel 0000:00:1b.0: no codecs found!
hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
hda-intel 0000:01:00.1: Using LPIB position fix
hda-intel 0000:01:00.1: Force to non-snoop mode
snd_hda_intel 0000:01:00.1: irq 55 for MSI/MSI-X
hda-intel 0000:01:00.1: Enable sync_write for stable communication
input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input10
input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input9
input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input8
input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input7
input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input6
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input5
type=1400 audit(1400540975.044:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=428 comm="apparmor_parser"
type=1400 audit(1400540975.044:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=428 comm="apparmor_parser"
type=1400 audit(1400540975.044:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=428 comm="apparmor_parser"
type=1400 audit(1400540975.044:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=428 comm="apparmor_parser"
type=1400 audit(1400540975.044:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=428 comm="apparmor_parser"
type=1400 audit(1400540975.044:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=428 comm="apparmor_parser"
type=1400 audit(1400540975.044:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=430 comm="apparmor_parser"
type=1400 audit(1400540975.044:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=430 comm="apparmor_parser"
type=1400 audit(1400540975.044:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=430 comm="apparmor_parser"
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
usbcore: registered new interface driver ftdi_sio
ftdi_sio 3-14:1.0: FTDI USB Serial Device converter detected
usb 3-14: Detected FT232RL
usb 3-14: Number of endpoints 2
usb 3-14: Endpoint 1 MaxPacketSize 64
usb 3-14: Endpoint 2 MaxPacketSize 64
usb 3-14: Setting MaxPacketSize 64
usb 3-14: FTDI USB Serial Device converter now attached to ttyUSB0
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usb 3-12.2: new high-speed USB device number 7 using xhci_hcd
input: Razer Razer BlackWidow as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/input/input11
hid-generic 0003:1532:010E.0001: input,hidraw0: USB HID v1.11 Keyboard [Razer Razer BlackWidow] on usb-0000:00:14.0-1/input0
input: Razer Razer BlackWidow as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.1/input/input12
hid-generic 0003:1532:010E.0002: input,hidraw1: USB HID v1.11 Device [Razer Razer BlackWidow] on usb-0000:00:14.0-1/input1
input: Razer Razer BlackWidow as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.2/input/input13
hid-generic 0003:1532:010E.0003: input,hidraw2: USB HID v1.11 Mouse [Razer Razer BlackWidow] on usb-0000:00:14.0-1/input2
usb 3-12.2: New USB device found, idVendor=0cf3, idProduct=9271
usb 3-12.2: New USB device strings: Mfr=16, Product=32, SerialNumber=48
usb 3-12.2: Product: UB91
usb 3-12.2: Manufacturer: ATHEROS
usb 3-12.2: SerialNumber: 12345
Bluetooth: Core ver 2.17
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
cfg80211: Calling CRDA to update world regulatory domain
usb 3-12.2: ath9k_htc: Firmware htc_9271.fw requested
usbcore: registered new interface driver ath9k_htc
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
Disabling lock debugging due to kernel taint
fglrx: module verification failed: signature and/or required key missing - tainting kernel
[fglrx] Maximum main memory to use for locked dma buffers: 15611 MBytes.
[fglrx] vendor: 1002 device: 6810 count: 1
[fglrx] ioport: bar 4, base 0xe000, size: 0x100
pci 0000:01:00.0: enabling device (0000 -> 0003)
[fglrx] Kernel PAT support is enabled
[fglrx] module loaded - fglrx 14.10.2 [Apr 15 2014] with 1 minors
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
Switched to clocksource tsc
random: nonblocking pool is initialized
init: failsafe main process (656) killed by TERM signal
usbcore: registered new interface driver ath3k
usb 3-12.2: ath9k_htc: Transferred FW: htc_9271.fw, size: 51272
init: udev-fallback-graphics main process (684) terminated with status 1
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
usb 3-12.1: USB disconnect, device number 6
ath9k_htc 3-12.2:1.0: ath9k_htc: HTC initialized with 33 credits
r8169 0000:02:00.0 eth0: link down
r8169 0000:02:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
r8169 0000:04:00.0 eth1: link down
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
r8169 0000:05:00.0 eth2: link down
IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
init: alsa-restore main process (991) terminated with status 99
ath9k_htc 3-12.2:1.0: ath9k_htc: FW Version: 1.3
ath: EEPROM regdomain: 0x60
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x60
ieee80211 phy0: Atheros AR9271 Rev:1
usb 3-2: new full-speed USB device number 8 using xhci_hcd
usb 3-2: New USB device found, idVendor=1532, idProduct=0101
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-2: Product: Razer Copperhead Laser Mouse
usb 3-2: Manufacturer: Razer
input: Razer Razer Copperhead Laser Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/input/input14
hid-generic 0003:1532:0101.0004: input,hidraw3: USB HID v1.00 Mouse [Razer Razer Copperhead Laser Mouse] on usb-0000:00:14.0-2/input0
input: Razer Razer Copperhead Laser Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/input/input15
hid-generic 0003:1532:0101.0005: input,hidraw4: USB HID v0.01 Keyboard [Razer Razer Copperhead Laser Mouse] on usb-0000:00:14.0-2/input1
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
fglrx_pci 0000:01:00.0: irq 56 for MSI/MSI-X
[fglrx] Firegl kernel thread PID: 1145
[fglrx] Firegl kernel thread PID: 1146
[fglrx] Firegl kernel thread PID: 1147
[fglrx] IRQ 56 Enabled
[fglrx] Reserved FB block: Shared offset:0, size:1000000
[fglrx] Reserved FB block: Unshared offset:f838000, size:4000
[fglrx] Reserved FB block: Unshared offset:f83c000, size:4c4000
[fglrx] Reserved FB block: Unshared offset:7fff4000, size:c000
usb 3-12.1: new full-speed USB device number 9 using xhci_hcd
usb 3-12.1: New USB device found, idVendor=0cf3, idProduct=3005
usb 3-12.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usbcore: registered new interface driver btusb
init: plymouth-upstart-bridge main process ended, respawning
r8169 0000:02:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready